Ana içeriğe geç
Order Management · Adım 10 / 20

SOP-OM-10 · Fit & Red Seal (RS) Sample Approval

Kapsam​

Kapsam: Fit ve Red Seal (RS) numunelerinin stil için onaylı fit ve üretim referansı olarak incelenmesi, onaylanması ve kesinleştirilmesini kapsar.

Amaç: Fit numunelerinin müşteri gereksinimlerini karşılamasını ve onaylı Red Seal numunesinin fit ve üretim standardını doğru tanımlamasını sağlar.

Sorumlu: DMR, onay izleme ve üretim referansı teyidi dahil Fit & Red Seal Sample Approval sürecinin sahibi ve koordinatörüdür.

Kapsadığı roller: Order Management içinde Fit ve Red Seal numune geliştirme ve Pre-Production faaliyetlerinde yer alan GT, PMR ve ilgili tedarikçi/fabrikalar için geçerlidir.

Süreç​

  1. GT — Review samples to ensure they meet the customer's fit requirements (Bkz. GL-OM-02 Sampling Rules — R1)

    • All fit samples must be made from the same batch and the same colour.
  2. PMR — If approved, depending on the customer, either send with comments or discuss in an online session

    • Waistband elastics directly affect the fit of the product. For this reason, it is very important that the correct, approved elastic quality is used from the sample approval stage through to final production.
  3. PMR — Approved fits become red seal samples; if rejected, the vendor submits a revised sample (Bkz. GL-OM-02 Sampling Rules — R6)

  4. PMR — Send the counter sample, tagged red, to the factory as the production reference

İş akışı​

GT — Review samples to ensure they meet the customer's fit requirements
PMR — If approved, depending on the customer, either send with comments or discuss in an online session
PMR — Approved fits become red seal samples; if rejected, the vendor submits a revised sample
PMR — Send the counter sample, tagged red, to the factory as the production reference

Eğitim​

Bu eğitim videosu Fit & Red Seal (RS) Sample Approval sürecini destekler; adımların yerine geçmez.

Loading training video…

Loading video…

Sınav​

Fit & Red Seal (RS) Sample Approval süreci için sınav. Süreç makalesini — eğitim videosu dahil — tamamladıktan sonra bu sınavı çözün.

Geçme notuBeklenen süreDeneme sayısı
80%Yaklaşık 10 dakika1 (kişi başına tek deneme)

Geçme notu %80. 10 adet tek seçenekli soru, her biri 1 puan. Sınav İngilizcedir.

Adınız ve puanınız kaydedilir ve liderlik tablosuna eklenir. Yalnızca bir deneme hakkınız vardır; başlamadan önce makaleyi ve eğitim videosunu bitirin.

Kilitli

Sınava başlamak için yukarıdaki eğitim videosunu %100 izleyin. İlerleme tamamlandığında sorular burada görünür.

Değişiklik günlüğü​

Değişiklik günlüğü
TarihDeğiştirenDeğişiklik
2026-10-07Technical TeamSınav 10 soruya çıkarıldı.
2026-10-01Technical TeamSınav Microsoft Forms'tan bu sayfaya taşındı; puanlar artık liderlik tablosuna ekleniyor.
2026-09-30Order ManagementYönerge referansları eklendi.
2026-09-29Technical TeamEğitim videosu eklendi ve sınav yayımlandı.
2026-09-17Technical TeamKontrollü prosedür Order Management'tan Technical'a taşındı.
2026-09-15Order Managementİlgili süreç referansları eklendi.
2026-09-11Order ManagementArticle Added